Confirmed

Processed.

Book Now
Grill Talk

Decoding the Traeger High Temp Error ER01

Get the Traeger high temp error ER01? Find out how hidden grease causes this code, how to safely recover, and when it's time for a deep clean.

A clean Traeger pellet grill drip tray and firepot ready for a cook

The Traeger high temp error ER01 means your grill's internal temperature has unexpectedly crossed the 500°F mark, which is almost always the result of a hidden grease fire inside the barrel. If you are staring at this code right now with smoke pouring out of your hopper or lid, your first instinct might be to panic. Don't. We see this error constantly during the busy Ontario cottage season across the Kawartha Lakes, and it is a situation that you can handle safely.

The ER01 Code Protects Your Smoker from Meltdown

When your Traeger's RTD temperature probe detects a massive heat spike, it triggers the ER01 code to shut down the auger motor and stop feeding wood pellets to the firepot. This is a built-in safety mechanism designed to stop feeding fuel to an out-of-control fire. The most common culprit is a grease fire. This happens when rendering pork shoulder or brisket fat pools on the drip pan or the bottom of the barrel, and a stray spark from the firepot ignites it. The code is simply the computer's way of cutting the primary fuel supply to prevent catastrophic damage to the metal barrel.

Safely Handling a Traeger Grease Fire

Handling a grease fire requires starving the flames of oxygen without spreading the fire to your deck.

  1. Keep the lid closed. Opening the lid feeds a massive rush of oxygen to the fire and can create a dangerous flare-up that singes your eyebrows.
  2. Turn off the grill using the main power switch on the controller.
  3. Unplug the grill from the wall outlet. This stops the induction fan from blowing air onto the fire, which otherwise acts like a bellows on a forge.
  4. Leave the lid closed for at least an hour while the grill cools completely.
  5. Never throw water on a grease fire. Water will instantly vaporize, spreading burning grease everywhere and potentially causing severe burns.

As a side note on safety, if you ever smell gas on a propane or natural gas grill sitting next to your smoker, or suspect a damaged hose, turn off the gas supply immediately and call a TSSA-registered gas technician. We know many homeowners in Durham Region run a gas and pellet setup side-by-side, and safety always comes first.

Hidden Grease Drives the High Temperature Spike

Many owners vacuum out the firepot and change the drip tray foil, but the ER01 code still returns the next time they cook. The real issue is the grease you cannot easily see. Over months of low-and-slow cooking, grease thickens and travels. It coats the internal walls of the barrel, blocks the grease drain tube, and pools in the bottom shell below the heat baffle. In humid areas near Scugog or Fenelon Falls, this sticky grease mixes with wood ash to form a thick, flammable sludge that simple scraping will not remove. When you finally turn the grill up to 450°F to sear some steaks, that hidden sludge reaches its flash point and ignites, sending the internal temperature soaring past 500°F.

Steps to Clear the Code and Restore Your Grill

Once the grill is completely cold to the touch, you need to remove the fuel source that caused the spike before you turn it back on.

  1. Remove the cooking grates, the V-shaped drip tray, and the heavy steel heat baffle.
  2. Use a dedicated shop vacuum to remove all ash from the firepot and the bottom of the barrel.
  3. Use a wooden or plastic putty knife to push all pooled grease down the drain tube and into the exterior bucket. Never use a wire bristle brush on your cooking grates or internal parts, as metal bristles can break off and end up in your food.
  4. Wipe down the RTD temperature sensor (the small metal rod sticking up inside the barrel on the left side). Use a soft cloth and warm soapy water to remove the black soot. Never use oven cleaner on this sensor, the painted exterior, or the porcelain grates.
  5. Empty the hopper and check the auger tube to ensure the fire did not travel backward and burn the pellets in the chute.
  6. Reassemble the grill, plug it in, and turn it on to see if the ER01 code has cleared. If the code persists on a cold grill, your RTD sensor was likely fried by the intense heat and needs to be replaced.

Professional Deep Cleaning Prevents Repeat ER01 Codes

Getting rid of baked-on grease after a severe fire is tough, dirty work. If your grill has suffered a massive grease fire, a standard plastic scraper will not remove the rock-hard, carbonized layers left behind on the heat baffle and barrel walls. This is where our BBQ cleaning services make a difference for homeowners. We disassemble the internal components and use commercial-grade, food-safe degreasers to bring the barrel back to bare metal. We also clear out the grease chute completely and ensure your temperature probe is spotless so it reads accurately. As of 2026-11, our pricing is straightforward: a Select package for a standard 3 to 4 burner-sized grill or mid-sized pellet smoker is $250.

When you invest in a premium pellet smoker, you want it to last for years of backyard cooking. Regular maintenance helps extend the life of your grill and keeps your food tasting like sweet hardwood smoke instead of bitter, rancid fat.

Ready to get your smoker back to perfect working order? Book a cleaning today.

Your questions

Why does my pellet grill catch fire on high heat?

Pellet grills catch fire on high heat because pooled grease in the barrel reaches its flash point. Low-temperature smoking allows grease to build up safely, but turning the dial to 450°F for searing will ignite that neglected grease. Regular deep cleaning removes this hidden fuel source.

How do I clean my Traeger RTD temperature sensor?

Clean your RTD sensor using a soft cloth, warm water, and mild dish soap. Gently wipe the metal rod to remove sticky smoke residue and carbon buildup. Never use abrasive scrubbing pads or harsh chemical oven cleaners, which will ruin the sensor's accuracy.

Can a Traeger ER01 code ruin my grill?

The ER01 code itself will not ruin your grill; it is a safety feature designed to prevent total meltdowns. However, the grease fire that triggers the code can warp your heat baffle, peel the exterior barrel paint, and fry the internal wiring if left unchecked.

Ready for a cleaner, safer grill?